ATAPI$501516$ - traducción al holandés

INTERFACE STANDARD FOR THE CONNECTION OF STORAGE DEVICES

Integrated Drive Electronics; Enhanced IDE; EIDE; Advanced technology attachment; P-ATA; Cable select; ATAPI Removable Media Device; IDE bus; Ultra ATA; Ultra DMA/100; Ultra DMA/66; Ultra DMA/33; Ultra IDE; Integrated drive electronics; E-IDE; ATAPI drive; ATA-4; ATA-3; ATA-2; DMA-33; DMA-66; Fast ATA; ATA/33; Cable Select; E-ide; UATA; Ultradma; ATA drive; ULTRA DMA/133; ATA-33; ATA-66; ATA-100; ATA/IDE; UltraATA; ATA-6; Ultra ata; Parallel ata; IDE drive; AT attachment; Parallel Advanced Technology Attachment; Advanced Technologies Attachment; AT Attachment with Packet Interface; AT Attachment Interface; IDE hard drive; Advanced Technology Attachment; ATA/ATAPI; IDE Cable; ARMD-HDD; ARMD-FDD; AT Attachment; ATA-7; UDMA 33; UDMA-33; UDMA33; X3T13; ATA-5; Ide connection; Integrated Device Electronics; ATA channel; PATA (Parallel ATA); ATA Secure Erase; ATA command set; Secure Erase; Uata; PATA/100

ATAPI

(computers) norm voor verbeterde interactieve gegevens invoer (maakt verbinding van aandrijfeenheid naar huiscomputer mogelijk)

IDE drive

IDE drive, diskdrive die werkt met IDE standaard

Integrated Drive Electronics

IDE standaard, standaard van diskdrive interface

Definición

ATAPI

Advanced Technology Attachment Packet Interface (Reference: ATA)

Mostrar más definiciones

Wikipedia

Parallel ATA

Parallel ATA (PATA), originally AT Attachment, also known as IDE, is a standard interface designed for IBM PC-compatible computers. It was first developed by Western Digital and Compaq in 1986 for compatible hard drives and CD or DVD drives. The connection is used for storage devices such as hard disk drives, floppy disk drives, and optical disc drives in computers.

The standard is maintained by the X3/INCITS committee. It uses the underlying AT Attachment (ATA) and AT Attachment Packet Interface (ATAPI) standards.

The Parallel ATA standard is the result of a long history of incremental technical development, which began with the original AT Attachment interface, developed for use in early PC AT equipment. The ATA interface itself evolved in several stages from Western Digital's original Integrated Drive Electronics (IDE) interface. As a result, many near-synonyms for ATA/ATAPI and its previous incarnations are still in common informal use, in particular Extended IDE (EIDE) and Ultra ATA (UATA). After the introduction of SATA in 2003, the original ATA was renamed to Parallel ATA, or PATA for short.

Parallel ATA cables have a maximum allowable length of 18 in (457 mm). Because of this limit, the technology normally appears as an internal computer storage interface. For many years, ATA provided the most common and the least expensive interface for this application. It has largely been replaced by SATA in newer systems.

https://en.wikipedia.org/wiki/Parallel ATA